However, it is almost inevitable that Part 3 will also be required, because this covers the guard-rails that are usually necessary with platforms and walkways. Free Ergonomics Guidance European Commission publication Guidance on the application of the essential health and safety requirements on ergonomics. It will be used by: For testing stepladders, the reader is referred to EN , Ladders. In addition this package gives guidance on choosing the appropriate means of access to your stationary machinery.

Uploader: Gokinos
Date Added: 26 January 2015
File Size: 64.87 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 80509
Price: Free* [*Free Regsitration Required]

Code of practice for the design of industrial type stairs, permanent ladders and walkways AMD No longer current but cited iso 14122-1 Building Regulations guidance. It is not applicable to powered means of access such as iso 14122-1, escalators, or other devices specially designed to lift persons between two levels. Annex ARequirements for the design of anti-climb devices, is normative and should, therefore, be complied with often an Annex to a standard is informative only.

As part of the free survey, the safety engineers provide a short written report that identifies areas of non-compliance and actions that can be taken to reduce risk, improve safety and comply with PUWER. Again there may be more recent versions of the document.

Clause 5Specific requirements applicable to stairsprovides further information for designing stairs. It is applicable to permanent means of access which are a part of a stationary machine, and also to non-powered adjustable parts e. Nevertheless, it would be prudent to verify the safety requirements either by calculation or 1422-1.

Final text received or FDIS registered for formal approval. If the designer chooses to verify the safety requirements by calculation, the information relating to the test methods must be taken into account so iso 14122-1 the two verification methods are comparable.


Check out our FAQs. Life cycle A standard is reviewed every 5 years 00 Jso. ISO – Permanent Access to Machinery Package provides the requirements to establish safe access to stationary machinery which can’t be otherwise safely accessed on the ground level. Procter Machine Guarding offers free Machine Guarding Compliance Surveys iso 14122-1 standalone machinery and assemblies of machines, old or new, and can also iso 14122-1 permanent means of access.

Clause 6Specific requirements applicable to step laddersprovides similar details to those in Clause 5. A final point to note is that ISO Part 5 is in preparation, which will deal with permanent means of access on mobile machinery.

ISO 14122-1:2016

Choice of fixed means and general requirements of access ISO As the voice of the U. Click here to find out how to access this document. General requirements for the design and construction of fixed and movable guards. Interestingly, a pragmatic approach is adopted, with several exceptions allowed under particular circumstances. Proceed to Checkout Continue Shopping. Clause 4Selection and design of ladder systems, provides iso 14122-1 of the information required by the designer, but more is contained in Clause 5.

You may delete a document from your Alert Profile at any time. Annex B informative illustrates the main dimensions of a fixed ladder equipped with a iso 14122-1 cage.

ISO – Permanent Access to Machinery Package

Free Machine Accident Investigation Kit To help companies meet their statutory obligations and prevent future accidents. Another point to note from the definitions is that handrails must be rigid, which excludes the 141221 of 141221- chains or cables. Where there iso 14122-1 hazards not covered by the standard, such as moving parts of machinery, extreme temperatures or hazards caused by the environment, the standard says that these should be considered and addressed by, for example, preventing unauthorised access.


Your basket is empty. Readers who are concerned about what changes might occur in relation to standards once the UK leaves the European Union can rest assured that it iso 14122-1 unlikely that there will be any change here because BS EN ISO is equivalent to the international standard and it is isi but inconceivable that the UK would cease to use this. Standards Subsctiption may be the perfect solution.

Choice of fixed means and general requirements of access. However, great care should be taken iso 14122-1 ribbed ramps, bearing in mind that subclause 4. One issue that is not addressed particularly well in the standard is the question of under what circumstances a permanent means of access is required, though an ISO risk assessment will help. The Amber document iso 14122-1 indicator indicates that some caution is needed when using this document – it ios either: