Rationale for Revisions. Toy Gun Marking The table top should be large enough such that, with the toy resting on and fully over the table top, the side of the measurement box from which the measurement is being made is also above the table top see 8. Alternatively, sheeting with an average thickness of less than 0. Do not disable any mechanical or electrical protective device such as clutches or fuses. A single sample may not consist of more than one material or color that is, composite testing is not allowed.

Uploader: Mezishakar
Date Added: 28 July 2007
File Size: 29.66 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 40595
Price: Free* [*Free Regsitration Required]

The thickness shall be determined using the test method in 8. The testing may be automated or performed manually.

Stability and Over-Load Requirements. The length of the strap shall be measured when the product is placed on a horizontal surface with no load. Indeed, one of the hallmarks of the Ff963-08 standard is that it continues to be at the forefront in identifying and effectively addressing potential emerging f96-308 issues astm f963-08 has led the world in this regard. Toys Intended adtm be Attached to a Crib. For example, the con? Folding Mechanisms and Astm f963-08. It applies to toys intended for children under 36 months of age that use winding keys that rotate as the mechanism unwinds.

If the toy shuts off automatically after an operating time of greater than 30 s, continue the test until the toy shuts off.


The wheel and axle assembly shall be positioned with the astm f963-08 vertical over a hole in a rigid plate, as shown in Fig. This includes items intended to be displayed on a desk or worn on bracelets, necklaces, key chains, etc.

ASTM F – 17 Standard Consumer Safety Specification for Toy Safety

Wheels, Tires, and Axles This seam test shall not be astm f963-08 if the material adjacent to the seam cannot be grasped between the thumb and fore? In addition, state labeling requirements may exist. Excluded from this de? The magnetic parts shall be brought together to a distance that initiates magnetic attraction, released, and then pulled apart to the distance where magnetic attraction ceases.

Labeling statements for balloons are contained in 5. Torque Tests for Removal of Components. NOTE 4—The battery compartment door is considered part of the battery compartment.

Not astm f963-08 children under 3 yrs. Such an example is a sharp point necessary for the function of a needle. The discharge mechanism shall be aimed perpendicular aatm the wall. If another battery chemistry is speci? A listing of exempt articles is provided in 16 CFR For more information about product safety, you may ask Intertek expert by filling in this enquiry form.

A rattle shall meet this requirement when tested under the force only f693-08 its own weight and in a noncompressed state. Design guidelines are provided in Annex A3. It is continually reviewed by ASTM International members to keep pace with innovation, to incorporate astm f963-08 information, and to ensure consistent application. In the case of toys with cutout eye holes, impact the area that would be directly adjacent to the eyes in normal use.



News Releases

F — 08 microphone and the t963-08 instrumentation system shall have the capability of handling linear peak levels exceeding the C-weighted peak levels by at least 10 dB.

The tension clamp shall then be removed, and sstm second clamp suitable for applying a tension load perpendicularly to the major axis of the test component shall be attached to the test object component. If astm f963-08 circuit protection device automatically resets, continue the stalled motor test until the battery is exhausted. Toys Intended to be Attached astm f963-08 a Crib or Playpen When rechargeable batteries are speci?

After being subjected to the use and abuse tests of 8.

F — 08 FIG.